XBOX360 high efficiency cooling fan

Powered by ghe xbox360 console, no extr AC adaptor needed;
xbox360 cooler fan Auto or manual power ON and OFF
Three fan work;
Can be used with the xbox360 in vertical or horizontal position.

Plug and Play
Instructiion Manual for purchasing the COOLER FAN 360 for the Xbox 360 entertainment console.This devicd wsa designed to enhance the performance of your Xbox360 by allowing your system to run cooler and more effidently. Please read this manual to familiarize yourself with the installation and operation of this device.
Features
1. Reduces the temperature of your Xbox360 to improve performance and minimize wear.
2. 3 quiet yet powerful fans increase system airflow,keeping the comsole cool,even in confined spaces such as entertainment centers
3. Designed to support both vertical and horizontal orientation.
4. Compact design.
5. Easy to install and remove.
6. Strategically designed to assist the Xbox360’s built in heat management system.
Installation
1. Make sure your Xbox360 is turned off and the power cord is disconnected frolm the outlet.If the console was previously connected to your TV.please temporarily detach the AV plug from the back of the console.
2. Align the coler fan male plug into the xbox360 power port and guide the upper security pins into the opposing air vent holes,please do not use excessive force.
3. Gently press the COOLER FANand console together until the security pins at the top lock into the air vent against the back of the console.
4. Attach the xbox360 power cord into the female power port on the intercooler.
5. Attach te Xbox360 power adaptor to a power outlet.
6. Attach the Xbox360 AV cable to the appropriate port on the back .
7. Power up the console,the COOLER FANwill activate automatically.
8. The COOLER FAN will automatically shut down when your console is powered down.
Removal
1. Make sure your system is turned off and the power cord is not connected to the outlet It the console was previously connected to your TV,please temporarily detach the AV plug from the back of the consle.
2. Disconnect te Xbox360 power adaptor from the COOLER FAN port.
3. While firmly holding the xbox360 in place, squeeze the top of COOLER FANin order to release the security pins from the console’s air vents . Now hold the COOLER FAN at the botton and gently pull it out of the Xbox360’s power port .Please to not use force, as this may damage both units.
CARE AND MAINTENANCE
Please review the following guidelines to ensure optimal performance from the COOLER FAN.
1. Do not expose the cooler fan to extreme conditions,including direct sunligh or excessive heat or humidity
2. Keep your Xbox360 and cooler fan away from liquids.
3. If cleaning is necessary, use a dry cloth to clean the affected area.Never use chemical.
When not in use ,simply turn the COOLER FAN OFF, Avoid repeated removal and attachment of this device.
Do not modify, alter, or tamper with this device as this voids the warranty and can be dangerous.
TROUBLESHOOTING
1. Ensure that the Xbox360’s power crd is properly attached to the power  port n the back of the COOLER FAN.
2. Make sure that the cooler fan is properly attached to your console, and ther are not noticeable gaps between the Xbox360 and the cooler fan.
Xbox360 is registered trademark.